NCERT Solutions for Class 10 Science Chapter 10: Light Reflection and Refraction

NCERT Solutions Class 10 Science Chapter 10 – CBSE Free PDF Download

*According to the CBSE Syllabus 2023-24, this chapter has been renumbered as Chapter 9.

NCERT Solutions for Class 10 Science Chapter 10 Light Reflection and Refraction is structured in a way to present a comprehensible coverage of scientific topics related to our daily life. Basic science has been laid out to students with no sharp divisions in disciplines such as Physics, Chemistry and Biology. NCERT is accepted and recommended throughout schools in the nation. Following are a few reasons to rely on NCERT Solutions:

  • The tricky questions inserted between chapters force students to think out of the box and apply the concepts learned in the chapter.
  • NCERT Solutions provide you with detailed solutions to the chapter questions that help you fetch marks in the CBSE exams.

NCERT Solutions are popular among students, especially for Science and Mathematics. NCERT Solutions for Class 10 Science Chapter 10 – Light Reflection and Refraction provided here consists of well-explained solutions to all the questions asked in the textbook. Get your hands on the comprehensive NCERT Solutions for Chapter 10 Light Reflection and Refraction, here, for free!

NCERT Solutions for Class 10 Science Chapter 10: Light Reflection and Refraction

Download PDF Download PDF

Access Chapter-wise NCERT Solutions for Class 10 Science – Light Reflection and Refraction

Questions Page: 168

1. Define the principal focus of a concave mirror.

Answer-

Light rays that are parallel to the principal axis of a concave mirror converge at a specific point on its principal axis after reflecting from the mirror. This point is called the principal focus of the concave mirror.

2. The radius of curvature of a spherical mirror is 20 cm. What is its focal length?

Answer-

Radius of curvature (R) = 20 cm

Radius of curvature of the spherical mirror = 2 × Focal length (f)

R = 2f

f= R/2 = 20 / 2 = 10

Therefore, the focal length of the spherical mirror is 10 cm.

3. Name the mirror that can give an erect and enlarged image of an object.

Answer-

The mirror that can give an erect and enlarged image of an object is a Concave Mirror.

4. Why do we prefer a convex mirror as a rear-view mirror in vehicles?

Answer-

A convex mirror is preferred as a rear-view mirror in cars and vehicles as it gives a wider field of view, which helps the driver see most of the traffic behind him. Convex mirrors always form an erect, virtual, and diminished image of the objects placed in front of it.

Page No: 171

1. Find the focal length of a convex mirror whose radius of curvature is 32 cm.

Answer-

Radius of curvature (R) = 32 cm

Radius of curvature = 2 × Focal length (f)

R= 2f

f = R/2 = 32/2 = 16

Therefore, the focal length of the given convex mirror is 16 cm.

2. A concave mirror produces three times magnified (enlarged) real image of an object placed at 10 cm in front of it. Where is the image located?

Answer-

Magnification produced by a spherical mirror:

NCERT Solutions for Class 10 Chapter 10 Image 1

Object distance (u) = – 10 cm

v = 3 × (- 10) = – 30 cm

Therefore, the negative sign indicates that an inverted image is formed in front of the given concave mirror at a distance of 30 cm.

Page No: 176

1. A ray of light travelling in air enters obliquely into water. Does the light ray bend towards the normal or away from the normal? Why?

Answer-

The light ray bends towards the normal. When a light ray enters from an optically rarer medium (which has a low refractive index) to an optically denser medium (which has a high refractive index), its speed slows down and bends towards the normal. As water is optically denser than air, a ray of light entering from air into water will bend towards the normal.

2. Light enters from air to glass, having a refractive index 1.50. What is the speed of light in the glass? The speed of light in vacuum is 3 x 108 ms-1.

Answer-

Refractive index of a medium (nm) = Speed of light in vacuum/Speed of light in the medium

Speed of light in vacuum (c) = 3 × 108 m/s

Refractive index of glass (ng) = 1.50

Speed of light in the glass (v) = Speed of light in vacuum/ Refractive index of glass

= c/ng

=3 × 108/1.50 = 2x 108 ms-1.

3. Find out, from the table, the medium having the highest optical density. Also, find the medium with the lowest optical density.

Material

medium

Refractive index Material medium Refractive

index

Air 1.0003 Canada Balsam 1.53
Ice 1.31
Water 1.33 Rock salt 1.54
Alcohol 1.36
Kerosene 1.44 Carbon disulphide 1.63
Fused

quartz

1.46 Dense

flint glass

1.65
Turpentine oil 1.47 Ruby 1.71
Benzene 1.50 Sapphire 1.77
Crown

glass

1.52 Diamond 2.42

Answer-

Lowest optical density = Air

Highest optical density = Diamond

The optical density of a medium is directly related to its refractive index. A medium with the highest refractive index will have the highest optical density and vice-versa.

It can be observed from the table that air and diamond, respectively have the lowest and highest refractive index. Hence, air has the lowest optical density and diamond has the highest optical density.

4. You are given kerosene, turpentine and water. In which of these does the light travel fastest? Use the information given in the table.

Material

medium

Refractive index Material medium Refractive

index

Air 1.0003 Canada Balsam 1.53
Ice 1.31
Water 1.33 Rock salt 1.54
Alcohol 1.36
Kerosene 1.44 Carbon disulphide 1.63
Fused

quartz

1.46 Dense

flint glass

1.65
Turpentine oil 1.47 Ruby 1.71
Benzene 1.50 Sapphire 1.77
Crown

glass

1.52 Diamond 2.42

Answer-

Light travels faster in water as compared to kerosene & turpentine, as the refractive index of water is lower than that of kerosene and turpentine. The speed of light is inversely proportional to the refractive index.

5. The refractive index of diamond is 2.42. What is the meaning of this statement?

Answer-

A diamond has a refractive index of 2.42, which means that the speed of light in a diamond will reduce by a factor of 2.42 as compared to its speed in the air.

In other words, the speed of light in a diamond is 1/2.42 times the speed of light in a vacuum.

Page No: 184

1. Define 1 dioptre of power of a lens.

Answer-

Dioptre is the SI unit of power of lens is denoted by the letter D. 1 dioptre can be defined as the power of a lens of focal length 1 metre.

2. A convex lens forms a real and inverted image of a needle at a distance of 50 cm from it. Where is the needle placed in front of the convex lens if the image is equal to the size of the object? Also, find the power of the lens.

Answer-

The position of the image should be at 2F since the image is real and the same size.

It is given that the image of the needle is formed at a distance of 50 cm from the convex lens. Therefore, the needle is placed in front of the lens at a distance of 50 cm.

Object distance (u) = – 50 cm

Image distance, (v) = 50 cm

Focal length = f

According to the lens formula,

NCERT Solutions for Class 10 Chapter 10 Image 2

3. Find the power of a concave lens of focal length 2 m.

Answer-

The focal length of the concave lens (f) = 2 m

Power of lens (P) = 1/f = 1/ (-2) = -0.5D

Page No: 185

Exercise

1. Which one of the following materials cannot be used to make a lens?

(a) Water

(b) Glass

(c) Plastic

(d) Clay

Answer

(d) Clay cannot be used to make a lens because if the lens is made up of clay, the light rays cannot pass through it

2. The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should be the position of the object?

(a) Between the principal focus and the centre of curvature

(b) At the centre of curvature

(c) Beyond the centre of curvature

(d) Between the pole of the mirror and its principal focus.

Answer-

(d) The position of the object should be between the pole of the mirror and its principal focus.

3. Where should an object be placed in front of a convex lens to get a real image of the size of the object?

(a) At the principal focus of the lens

(b) At twice the focal length

(c) At infinity

(d) Between the optical centre of the lens and its principal focus.

Answer –

(b) The object should be placed at twice the focal length

4. A spherical mirror and a thin spherical lens have a focal length of -15 cm. The mirror and the lens are likely to be

(a) both concave

(b) both convex

(c) the mirror is concave, and the lens is convex

(d) the mirror is convex, but the lens is concave

Answer –

(a) Both are likely to be concave.

Page No: 186

5. No matter how far you stand from a mirror, your image appears erect. The mirror is likely to be

(a) plane

(b) concave

(c) convex

(d) either plane or convex

Answer –

(d) The mirrors are likely to be either plane or convex

6. Which of the following lenses would you prefer to use while reading small letters found in a dictionary?

(a) A convex lens of focal length 50 cm

(b) A concave lens of focal length 50 cm

(c) A convex lens of focal length 5 cm

(d) A concave lens of focal length 5 cm

Answer –

(c) A convex lens of focal length 5 cm can be used while reading small letters found in a dictionary

7. We wish to obtain an erect image of an object, using a concave mirror of focal length 15 cm. What should be the range of distance of the object from the mirror? What is the nature of the image? Is the image larger or smaller than the object? Draw a ray diagram to show the image formation in this case.

Answer-

Range of the distance of the object = 0 to 15 cm from the pole of the mirror.

Nature of the image = virtual, erect, and larger than the object.

8. Name the type of mirror used in the following situations.

(a) Headlights of a car

(b) Side/rear-view mirror of a vehicle

(c) Solar furnace

Support your answer with a reason.

Answer-

(a) Concave Mirror: Concave mirrors can produce a powerful parallel beam of light when the light source is placed at their principal focus.

(b) Convex Mirror: Because of its largest field of view.

(c) Concave Mirror: Because it concentrates the parallel rays of the sun at a principal focus.

9. One-half of a convex lens is covered with black paper. Will this lens produce a complete image of the object? Verify your answer experimentally. Explain your observations.

Answer-

Yes, it will produce a complete image of the object, as shown in the figure. This can be verified experimentally by observing the image of a distant object, like a tree on a screen, when the lower half of the lens is covered with black paper. However, the intensity or brightness of the image will reduce.

10. An object 5 cm in length is held 25 cm away from a converging lens of focal length 10 cm. Draw the ray diagram and find the position, size and nature of the image formed.

Answer-

Height of the object, h0 = 5 cm

Distance of the object from converging lens, u = -25 cm

Focal length of a converging lens, f = 10 cm

Using the lens formula,

NCERT Solutions for Class 10 Chapter 10 Image 3

Thus, the image is inverted and formed at a distance of 16.7 cm behind the lens and measures 3.3 cm. The ray diagram is shown below.

NCERT Solutions for Class 10 Chapter 10 Image 4

11. A concave lens of focal length 15 cm forms an image 10 cm from the lens. How far is the object placed from the lens? Draw the ray diagram.

Answer-

Focal length of concave lens (OF1), f = – 15 cm

Image distance, v= – 10 cm

According to the lens formula,

NCERT Solutions for Class 10 Chapter 10 Image 5

The negative value of u indicates that the object is placed 30 cm in front of the lens. This is shown in the following ray diagram.

NCERT Solutions for Class 10 Chapter 10 Image 6

12. An object is placed at a distance of 10 cm from a convex mirror of focal length 15 cm. Find the position and nature of the image.

Answer-

Focal length of convex mirror (f) = +15 cm

Object distance (u) = – 10 cm

According to the mirror formula,

NCERT Solutions for Class 10 Chapter 10 Image 7

The image is located at a distance of 6 cm from the mirror on the other side of the mirror.

The positive and a value of less than 1 magnification indicates that the image formed is virtual, erect, and diminished.

13. The magnification produced by a plane mirror is +1. What does this mean?

Answer-

The positive sign means an image formed by a plane mirror is virtual and erect. Since the magnification is 1, it means that the size of the image is equal to the size of the object.

14. An object 5 cm is placed at a distance of 20 cm in front of a convex mirror of radius of curvature 30 cm. Find the position, nature and size of the image.

Answer-

Object distance (u) = – 20 cm

Object height (h) = 5 cm

Radius of curvature (R) = 30 cm

Radius of curvature = 2 × Focal length

R = 2f

f = 15 cm

According to the mirror formula,

NCERT Solutions for Class 10 Chapter 10 Image 8

The positive value of image height indicates that the image formed is erect.

Hence, the image formed is erect, virtual, and smaller in size.

15. An object of size 7.0 cm is placed at 27 cm in front of a concave mirror of focal length 18 cm. At what distance from the mirror should a screen be placed so that a sharply focused image can be obtained? Find the size and nature of the image.

Answer-

Object distance (u) = – 27 cm

Object height (h) = 7 cm

Focal length (f) = – 18 cm

According to the mirror formula,

NCERT Solutions for Class 10 Chapter 10 Image 9

The negative value of image height indicates that the image formed is inverted.

16. Find the focal length of a lens of power -2.0 D. What type of lens is this?

Answer-

Power of lens (P) = 1/f

P = -2D

f = -1/2 = -0.5 m

A concave lens has a negative focal length. Therefore, it is a concave lens.

17. A doctor has prescribed a corrective lens of power +1.5 D. Find the focal length of the lens. Is the prescribed lens diverging or converging?

Answer-

Power of lens (P) = 1/f

P = 1.5D

f = 1/1.5 = 10/15 = 0.66 m

A convex lens has a positive focal length. Therefore, it is a convex lens or a converging lens.


Also Access 
NCERT Exemplar Solutions for Class 10 Science Chapter 10
CBSE Notes for Class 10 Science Chapter 10

NCERT Solutions For Class 10 Science Chapter 10 – Light Reflection and Refraction

Chapter 10 Light Reflection and Refraction are one of the important chapters in Class 10 Science, and the expected marks weightage of the chapter, according to the latest marking scheme is 7 marks. In Chapter 10 of Class 10 Science, students will get well-versed in light phenomena such as refraction and reflection. One will learn about spherical mirrors, image formation and to draw ray diagrams.

Topics covered in this chapter:

  • Reflection of Light
  • Spherical Mirrors
  • Image Formation by Spherical Mirrors
  • Representation of Images Formed by Spherical Mirrors Using Ray Diagram – 4 Questions (2 short, 2 long)
  • Mirror Formula and Magnification – 2 Questions (2 Numerical)
  • Refraction of Light – 5 Questions (1 numerical, 2 Long answers and 1 Short answer)
  • Power of Lens – 3 Questions (2 Short answers and 1 numerical)

Have you ever wondered what makes things visible to us? The answer to the question is light. During the day, it is sunlight that helps us see objects. When light falls on an object, it reflects. This reflected ray, when received by our eyes, helps us see things. Numerous wonderful phenomena are associated with light, such as the formation of the rainbow, of stars, and many more. In Chapter 10 Light Reflection and Refraction of Class 10 Science, let us study the phenomena of refraction and reflection using straight-line propagation of light. We shall also try to understand the reflection of light by spherical mirrors in this chapter using the NCERT Solutions from BYJU’S.

Key Features of NCERT Solutions for Class 10 Science Chapter 10 – Light Reflection and Refraction:

  • Provides comprehensive answers to all the questions asked in the chapter
  • The language used is lucid and can be understood by all
  • The information provided is genuine and appropriate
  • These solutions can be referred for CBSE exams, Olympiads and other competitive exams
  • Concise answers are provided to help students understand better

Frequently Asked Questions on NCERT Solutions for Class 10 Science Chapter 10

Q1

Is the BYJU’S NCERT Solutions for Class 10 Science Chapter 10 available in PDF format?

Yes, BYJU’S provides the Science Chapter 10 NCERT Solutions for Class 10 in PDF format, which the students can download. These reference materials from BYJU’S are hassle-free and help students to score well in the Class 10 CBSE exams. The PDFs created by the experts are of high quality, and the students can use the free download links to access them.
Q2

What are the uses of referring to BYJU’S NCERT Solutions for Class 10 Science Chapter 10?

The uses of referring to BYJU’S NCERT Solutions for Class 10 Science Chapter 10 are –
1. Each answer has a comprehensive explanation to help students understand the concepts.
2. The solutions are strictly based on the syllabus designed by the CBSE board.
3. The chapter-wise solutions are accurate and genuine to improve the problem-solving skills among students.
4. PDFs of solutions are available for free download, which can be downloaded and referred to by the students.
Q3

What are the topics covered in the NCERT Solutions for Class 10 Science Light Reflection and Refraction, and how many questions are present under each of them?

The topics covered in the NCERT Solutions for Class 10 Science Light Reflection and Refraction are –
1. Reflection of Light
2. Spherical Mirrors
3. Image Formation by Spherical Mirrors
4. Representation of Images Formed by Spherical Mirrors Using Ray Diagram – 4 Questions (2 short, 2 long)
5. Mirror Formula and Magnification – 2 Questions (2 Numerical)
6. Refraction of Light – 5 Questions (1 numerical, 2 Long answers and 1 Short answer)
7. Power of Lens – 3 Questions (2 Short answers and 1 numerical)

Comments

Leave a Comment

Your Mobile number and Email id will not be published.

*

*

  1. It is very helpful for me . Nice learning platform 🥰😍😘

close
close

Play

&

Win